Kreg SML-C250S5-250 305 Stainless Steel Pocket Hole Screws - 2 1/2", #10 Coarse, Washer Head, 250 count |
 enlarge | Brand: Kreg
Category: Home Improvement
List Price: $99.99
Buy New: $55.00
You Save: $44.99 (45%)
Rating:  1 reviews
Sales Rank: 40152
Media: Tools & Hardware
Shipping Weight (lbs): 3.8
Dimensions (in): 7.5 x 4.7 x 3
Model: SML-C250S5-250
UPC: 647096415983
EAN: 0647096415983
ASIN: B000VK7PSE
Shipping: Eligible for Super Saver Shipping
Availability: Usually ships in 24 hours
|
|
|
Features:
| • | Great for outdoor applications | | • | Thicker fillet radius under the head reduces the possibility of the head twisting off | | • | Large Maxi-Loc Head stops when it hits the bottom of the hole | | • | Needle sharp point minimizes walking | | • | Sharp edge of self-tapping tip drills a cleaner pilot hole |
|
|
Accessories:
|
|
Similar Items:
|
|
Customer Reviews:
Good Holding Power, but heads round out May 26, 2008
SeaWolf's Home Workshop Blog (Florida)
2 out of 2 found this review helpful
These were good screws for joining ACQ (requires stainless fasteners) 2" x 4"s with pocket holes. None of the screws sheared off, but several rounded out with the #2 square drive. This occurs more so than with other steel pocket screws I've used. They did screw into the wood effortlessly.
My only real complaint is the setting Kreg specifies for mounting the pocket hole jig. In soft ACQ wood, these screw will come out the other side of your joint. You either have to use shorter screws or back the pocket hole jig back an additional 3/8". I have seen this in hardwood, but it is a concern in ACQ woods.
Overall they made a strong pocket joint with ACQ lumber.
|
